micro:bit solutions

Featured
bit:booster
bit:booster
from $34.99

Enable students to explore physical computing with the micro:bit and bit:booster. Order with or without a micro:bit. Comes with 5 How To cards to start exploring physical computing out of the box.

bit:buddy
bit:buddy
from $14.99

The bit:buddy provides a compact, complete solution for taking your micro:bit projects on the go. This low cost solution is the perfect introduction to the micro:bit and works great for wearable technology.

Open Hardware Cables
Open Hardware Cables
$10.00

Looking for an easy way to use parts from other kits with your micro:bit and bit:booster (or even Arduino & Raspberry Pi)? These 10" cables will save you money by making it easier to re-use old parts. We designed three different cables to work with the most common third party hardware out there. Select the best bundle based on your needs.

bit:buddy+
bit:buddy+
from $24.99

The bit:buddy+ is the newest, feature-packed micro:bit solution from Lectrify.

We challenge you to find a more feature rich board in such a small footprint.

Designed to work with micro:bit v1, micro:bit v2 and the Adafruit CLUE board.

Battery pack and USB cable included.

Accessories: OLED display with Cable
Accessories: OLED display with Cable
$5.00

This 0.96” OLED display has 128X64 Pixels and can be easily coded to in Microsoft MakeCode. It includes the cable needed to use the I2C port on the bit:booster and bit:buddy+

This versatile accessory is a powerful, low cost must-have for any micro:bit project.

bit:buddy - (5mm posts- V1 micro:bit only)
sale
bit:buddy - (5mm posts- V1 micro:bit only)
from $7.99

CLEARANCE SALE

NOTE: This listing is for the inventory that only works with V1 micro:bit. Newer bit:buddy boards use a 7mm screw-down post compatible with V1 & V2 micro:bit boards

The bit:buddy provides a compact, complete solution for taking your micro:bit projects on the go. This low cost solution is the perfect introduction to the micro:bit and works great for wearable technology.

bit:explorer
sale
bit:explorer
from $18.99

LAUNCH SALE! Order now and save 25%

Coding is a journey and exploring should be fun: the bit:explorer is your ultimate companion.

Order with or without a micro:bit. Comes with 4 How To cards to start exploring physical computing out of the box.

Mission Control
sale
Mission Control
from $12.99

INTRODUCTORY SALE - SHIPPING EXPECTED 9/11/2023

Mission Control is an add-on board for the bit:explorer or Makey:bit that makes it easy to add an OLED screen, 4 buttons and a joystick.

Mission Control components are fully supported in in the most common micro:bit programming environments like MakeCode, microPython, etc., enabling students to easily code projects like games, remote controls, texting apps…

Mission Control: Stand Alone game controller/remote control
sale
Mission Control: Stand Alone game controller/remote control
from $14.99

The Mission Control is a lightweight micro:bit add-on board that adds an OLED screen, joystick and 4 buttons to your micro:bit in a game-controller form factor with onboard battery.

STANDALONE KITS

Featured
IMG_3319.jpg
LED 20 Pack
$15.00

Light up your DIY projects with LEDs. We now offer 20 packs of loose LEDs in our most popular colors and sizes

Shake it Mini Cardboard Robot_Page_1.png
Shake it mini Bulk Pack
$65.00

Make your own pizza racer project or robot critters with Shake it minis. The pack includes 15 Shake it mini boards. 

Serves 15 students

Circuit Craft Pack and Project Pack-01.png
Circuit Craft Pack
$65.00

Skill Level: Beginner-Intermediate

Duration: 1-2 hours

Learn about simple circuits, conductivity and resistance while making open-ended circuit crafts. 

Serves 20 students

 

Classroom Pack Full Box.jpg
Electricity and Engineering Classroom Pack
$499.00

The Electricity and Engineering Classroom pack is a portable maker space and includes everything you need to do engineering and circuit projects with your students. This kit includes everything for students to do our most popular, standards based projects… and more.

BatteryFront.jpg
Bulk Coin Cell CR2032 Battery Holders with Switch
from $20.00

This low ost battery pack is designed to be the only battery pack you'll need for your maker projects. Whether you are sewing LEDs to a shirt, making circuit crafts with pipe cleaners or adding LEDs to LEGO.

COMPACT DESIGN - PCB measures only 24mm X 24mm

  • ON/OF SWITCH - Save on batteries with the ON/OFF switch

  • PERFECT FOR SMALLER FINGERS - Large switch and power terminals make it easier to sew or connect with using your preferred materials.

  • LEGO COMPATIBLE - Designed to snap onto LEGO

  • COLOR CODED - Positive is marked RED and Negative is marked WHITE making it easy to troubleshoot your circuit.

40times5 image.jpg
sold out
200 individually packaged 2032 Batteries
$30.00

  • Individually Packaged

  • Bundled in packs of 5 batteries

  • 0% Mercury, Lead or Cadmium

  • Perfect for brushbots, LED and paper crafts.

Conductive Tape Bundle
Conductive Tape Bundle
from $12.00

Can’t decide between Copper Tape or Conductive Nylon Tape, with this bundle, you don’t have to.

Included in this bundle you get:

  • 20meter roll of 5mm width Copper Tape with conductive adhesive.

  • 20meter roll of 5mm width Conductive Nylon Tape with conductive adhesive.

  • 3D printed tape dispenser.

Electricity & Circuits

Featured
Battery+LED-05.jpg
Battery + LED Pack
$50.00

Skill Level: Beginner

Duration: 1-2 hours

Students explore electricity by making their own paper clip circuits. In this activity, students gain familiarity with conductivity, resistance, the flow of electricity and how to make simple circuits!

fullsizeoutput_230b.jpeg
sold out
Circuit Craft Pack
$65.00

Skill Level: Beginner-Intermediate

Duration: 1-2 hours

Learn about simple circuits, conductivity and resistance while making open-ended circuit crafts.

Serves 20 students

IMG_7766.JPG
Soft Circuits
$65.00

Skill Level: Intermediate

Duration: 2-3 hours

Students make their own light-up wearable tech projects with LEDs and conductive materials. 

Serves 20 students

LEGO Crafts-02.png
LEGO Crafts
$65.00

Skill Level: Beginner-Intermediate

Duration: 1-2 hours

Learn about simple circuits, conductivity and resistance while making open-ended circuit crafts.

Serves 20 students

BatteryFront.jpg
Bulk Coin Cell CR2032 Battery Holders with Switch
from $20.00

This low ost battery pack is designed to be the only battery pack you'll need for your maker projects. Whether you are sewing LEDs to a shirt, making circuit crafts with pipe cleaners or adding LEDs to LEGO.

COMPACT DESIGN - PCB measures only 24mm X 24mm

  • ON/OF SWITCH - Save on batteries with the ON/OFF switch

  • PERFECT FOR SMALLER FINGERS - Large switch and power terminals make it easier to sew or connect with using your preferred materials.

  • LEGO COMPATIBLE - Designed to snap onto LEGO

  • COLOR CODED - Positive is marked RED and Negative is marked WHITE making it easy to troubleshoot your circuit.

40times5 image.jpg
sold out
200 individually packaged 2032 Batteries
$30.00

  • Individually Packaged

  • Bundled in packs of 5 batteries

  • 0% Mercury, Lead or Cadmium

  • Perfect for brushbots, LED and paper crafts.

Conductive Tape Bundle
Conductive Tape Bundle
from $12.00

Can’t decide between Copper Tape or Conductive Nylon Tape, with this bundle, you don’t have to.

Included in this bundle you get:

  • 20meter roll of 5mm width Copper Tape with conductive adhesive.

  • 20meter roll of 5mm width Conductive Nylon Tape with conductive adhesive.

  • 3D printed tape dispenser.

Learn To Solder - Sugar Skull
Learn To Solder - Sugar Skull
from $12.00

PROJECT AND SKILLS BADGE ALL IN ONE - Once the LEDs have been soldered, this project can be easily personalized with permanent markers, stickers and stick-on gems. The final project also serves as a skills badge to demonstrate competency in basic soldering skills.

DESIGNED FOR BEGINNERS - Kit includes two large (10mm) LEDs and easy to follow instructions to ensure sucess. The battery holder and on/off switch are pre-soldered and are easily screwed onto the skull front SOLDERING KIT, CRAFT PROJECT,

Learn To Solder - Holiday Tree
sale
Learn To Solder - Holiday Tree
from $12.00

SOLDERING KIT & CRAFT PROJECT - Once the LEDs have been soldered, the tree can be easily personalized with pipe cleaners, markers, stickers and stick-on gems… use your imagination!

Conductive Tape
sale
Conductive Tape
from $6.00

5mm wide conductive nylon tape in 20M (~60ft) roll.

Engineering 

Featured
IMG_7159.jpg
Turkey Racer
$100.00

Skill Level: Beginner

Duration: 1-2 hours

Explore engineering concepts with this hands-on interactive project. 

Serves 15 students

Pizza Racer
Pizza Racer
$50.00

Skill Level: Beginner-Intermediate

Duration: 2 hours

Explore the engineering process with a pizza racer project.

Each kit serves 10 students (or 20 if paired)

Exploring Engineering-02.png
Exploring Engineering
$45.00

Skill Level: Intermediate

Duration: 1-2 hours

Students explore Newton's 2nd Law using both versions of the Shake it board. 

Serves 10 students

IMG_3340.JPG
sale
STEM Kits - Turkey Racer
from $5.00

Skill Level: Beginner

Duration: 1-2 hours

Explore engineering concepts with this hands-on interactive project. 

IMG_0162.jpg
STEM Kits - Pizza Racer
from $5.00

Skill Level: Beginner-Intermediate

Duration: 2 hours

Explore the engineering process with a pizza racer project.

STEM Kits - Dancing Space Monster
STEM Kits - Dancing Space Monster
from $5.00

Skill Level: Beginner

Duration: <1 Hour

Explore engineering concepts with this hands-on interactive project. 

Individually packaged kits are perfect for both remote learning and classrooms.

STEM Kits - LED Flashlight
STEM Kits - LED Flashlight
from $5.00

Skill Level: Beginner

Duration: <1 hour

Learn about simple circuits by building a functional flashlight with a battery, LED, brass brads and copper tape.

Screen Shot 2021-02-17 at 11.03.39 AM.png
STEM Kits - Exploring Electricity
from $5.00

Skill Level: Beginner

Duration: 1-2 hours

Explore how circuits and electricity works through a craft based project followed by a science experiment using a conductivity probe.

STEM Kits - Sugar Skull
STEM Kits - Sugar Skull
from $5.00

Skill Level: Beginner

Duration: <1 hour

Learn about simple circuits, including the difference between serial and parallel circuits by building a Sugar Skull with flashing, color changing LEDs and conductive tape.

IMG_2508.jpg
STEM Kits - Dancing Daisy Racers
from $5.00

Skill Level: Beginner-Intermediate

Duration: 2 hours

Explore the engineering process by racing colorful daisies!

simple Logic

Featured
Switches cover picture-06.png
sold out
Simple Logic: Switches
$30.00

Skill level: Beginner

Duration: 1-2 hours

Explore how switches enable simple logic.

soldering 

Featured
Touchpad switches-03.png
Soldering Kit: TouchPad
from $10.00

Transistors are the building blocks for modern electronics and the Touchpad circuit is a great introduction to their basic function.

Nitelight-03.png
Soldering Kit: NiteLight
from $10.00

Take your exploration of transistors the next step beyond the TouchPad with this board that uses a a photo-transistor coupled with an NPN transistor to create a light activated circuit.

Blinker-03.png
Soldering Kit: Blinker
from $10.00

Learn how to make LEDs blink while exploring how capacitors work.

Sensor materials-03.png
Soldering Kit: Sensor
from $10.00

Build a circuit that senses a change in a sensor while exploring the properties of this fundamental circuit, the Wheatstone Bridge.

The Full Set-01.png
The Full Set
$35.00

Master your soldering skills with all four Very Useful Circuits. 

Learn To Solder - Sugar Skull
Learn To Solder - Sugar Skull
from $12.00

PROJECT AND SKILLS BADGE ALL IN ONE - Once the LEDs have been soldered, this project can be easily personalized with permanent markers, stickers and stick-on gems. The final project also serves as a skills badge to demonstrate competency in basic soldering skills.

DESIGNED FOR BEGINNERS - Kit includes two large (10mm) LEDs and easy to follow instructions to ensure sucess. The battery holder and on/off switch are pre-soldered and are easily screwed onto the skull front SOLDERING KIT, CRAFT PROJECT,

Learn To Solder - Holiday Tree
sale
Learn To Solder - Holiday Tree
from $12.00

SOLDERING KIT & CRAFT PROJECT - Once the LEDs have been soldered, the tree can be easily personalized with pipe cleaners, markers, stickers and stick-on gems… use your imagination!

Learn To Solder - NiteLight Lantern
Learn To Solder - NiteLight Lantern
from $12.00

Build a simple logic circuit with transistors that turns on an LED when it gets dark.

PROJECT AND SKILLS BADGE ALL IN ONE - Once the components have been soldered, this project can be personalized with permanent markers, stickers and stick-on gems. The final project also serves as a skills badge to demonstrate competency in more advanced soldering skills.

DESIGNED FOR BEGINNERS TO LEARN ELECTRONICS - Kit includes necessary components to build a simple circuit that is clearly explained in the enclosed documentation. Learn to solder and how transistors work at the same time in this fun and engaging project. The battery holder and on/off switch are pre-soldered and are easily screwed onto the skull front SOLDERING KIT, CRAFT PROJECT,

We accept purchase orders. Use our contact form or email us at info [at] lectrify.it